Maximum Valid Dilution (MVD) Calculator for Bacterial Endotoxins Testing

Calculate the maximum valid dilution (MVD) for the bacterial endotoxins test (BET) from your endotoxin limit, the concentration of the sample solution and the lysate sensitivity (λ). The calculator uses the general MVD equation in USP General Chapter <85> and handles EU/mg, EU/mL and EU/Unit limits with automatic unit conversion.

Bacterial endotoxins test · USP <85> formula

MVD Calculator

Runs in your browser
Endotoxin limit and sample

From the monograph or your approved specification (EL = K/M). Enter your own value: there is no universal limit.

Don't know the endotoxin limit? Calculate it here with K/M →

Gel-clot: the labeled lysate sensitivity. Photometric (turbidimetric or chromogenic): the lowest endotoxin concentration on the standard curve.

New gel-clot lysate lot? Confirm its labeled sensitivity (λ) →

Maximum Valid Dilution

MVD = –

Enter the endotoxin limit, concentration and λ.

Formula

MVD = EL × Cλ

Your test dilution must not exceed the calculated MVD, and it must be shown suitable (inhibition/enhancement testing) for the BET method used.

Learn how MVD is calculated

New to MVD, or want to check the reasoning behind the result? Our guide Maximum Valid Dilution (MVD) in BET: Formula and Worked Example explains the formula, which concentration and λ to use, a step-by-step example, common calculation mistakes, how MVD relates to method suitability, and answers to frequently asked questions.

This calculator is an educational tool. It is not approved or endorsed by USP or any regulator. Always verify results against your approved specifications, the current pharmacopoeial text and your validated laboratory procedures.