Free, fast calculators for pharmaceutical and laboratory microbiology. Each tool runs entirely in your browser, shows every step of the calculation, and links to the guidance behind it.
Available tools
Maximum Valid Dilution (MVD) Calculator
Calculate the maximum valid dilution for the bacterial endotoxins test from the endotoxin limit, the concentration of the sample solution and the lysate sensitivity (λ). Supports EU/mg, EU/mL and EU/Unit limits with automatic unit conversion.
Endotoxin Limit Calculator (K/M)
Calculate the endotoxin limit of a parenteral product with EL = K/M from USP <85>. Covers intrathecal and other routes, whole-patient doses, infusions, dosing per body surface area and radiopharmaceuticals (175/V and 14/V), and passes the result straight to the MVD Calculator.
Lysate Sensitivity Confirmation Calculator (Gel-Clot)
Record the +Ve/−Ve tube readings from the USP <85> test for confirmation of labeled lysate sensitivity (2λ, λ, 0.5λ and 0.25λ in four replicates). Get each endpoint, its log, the geometric mean endpoint concentration and whether λ is confirmed (0.5λ to 2λ).
ISO 14644 Sampling Location Calculator
Enter the cleanroom area in m² or ft² to get the minimum number of sampling locations from ISO 14644-1:2015 Table A.1 (and the formula for areas above 1,000 m²), with the steps, the minimum sample volume rule and placement guidance.
ISO 14644-1 Sample Volume Calculator
Pick an EU/PIC/S GMP grade or ISO class, the particle sizes and your counter flow rate (1 CFM or 100 L/min) to get the minimum sample volume per location from Vs = (20 / Cn,m) × 1,000 and the run time rounded up to whole minutes.
Dilution Calculator (C₁V₁ = C₂V₂)
Solve C₁V₁ = C₂V₂ for stock volume, final volume or either concentration. Converts mM/µM, mg/mL, % v/v, ×, CFU/mL and EU/mL, and gives the stock + diluent recipe, dilution factor, pipette choice and a stepwise plan when the stock volume is too small.
Doubling Time (Generation Time) Calculator
Get the bacterial doubling time from two counts, or paste a growth curve and let the calculator find and fit the exponential phase (log-scale chart and R²). Also predicts the final count, time needed or starting count, with n, k and μ.
ACPH Calculator (Air Changes per Hour and CFM)
Work out the supply airflow in CFM from each filter’s size and five face-velocity readings, then the air changes per hour for the room. Also accepts capture-hood readings or a known total airflow, in imperial or metric units.
USP <71> Sterility Test Sample Size Calculator
Find how many containers to submit for a sterility test and how much product goes into each medium, from the product type, batch size and fill, following USP <71>.
Planned tools
These are on the roadmap and are not available yet:
- Dilution series planner for gel-clot testing
- Colony count (CFU/mL and CFU/g) calculator
How these tools are built
- Transparent: every result shows the formula, the inputs and each step.
- Private: nothing you type is sent to a server.
- Lightweight: no apps, sign-ups or heavy scripts.
The tools support, but do not replace, your approved specifications, pharmacopoeial texts and validated procedures.
Companion guides for each calculator
Each tool has a written guide that explains the method, the formula and the regulatory basis behind the numbers.
- Dilution and doubling time calculators: Total viable count (TVC): plate count method, formula and calculation
- Endotoxin limit calculator: Endotoxin limit calculation (K/M) with worked examples
- MVD calculator: Maximum valid dilution (MVD) in BET
- Lysate sensitivity calculator: Lysate sensitivity confirmation for gel-clot BET
- ISO 14644 sampling location and sample volume calculators: ISO 14644-1 cleanroom classification
- ACPH calculator: Cleanroom Grades A to D vs ISO 14644 classes
- USP 71 sample size calculator: Sterility testing (USP 71): procedure, media and sample size
