Total viable count (TVC) is an estimate of the number of living microorganisms in a sample that can grow into visible colonies on a non-selective agar medium under stated conditions. The result is expressed in colony-forming units per millilitre or per gram (CFU/mL or CFU/g), not in cells. The same measurement appears under several names: aerobic plate count, standard plate count, heterotrophic plate count and, in pharmacopoeial testing, total aerobic microbial count (TAMC).
The calculation is simple: CFU per mL or g = average colony count × dilution factor ÷ volume plated (mL). Most errors come from the steps around it: choosing which plates to count, handling two countable dilutions, and reporting the result with sensible precision. Each is covered below with worked examples.
What a viable count actually measures
A plate count records colony-forming units, not individual cells. One colony may start from a single cell, a pair, a chain of streptococci or a clump of staphylococci, and the plate cannot tell them apart. This is why results are reported as CFU.
“Viable” in this context means culturable under the test conditions. The medium, incubation temperature, atmosphere and time all decide what grows. Strict anaerobes, fastidious organisms, heat- or chemically injured cells and cells in a viable but non-culturable state can be alive and still be missed. For that reason a TVC result means little without its conditions, for example “colony count at 30 °C, plate count agar, 72 h”.
TVC is an indicator of general microbial load, hygiene or process control. It is not a test for pathogens, and a low count does not show that a product is free of specified or objectionable organisms.
One test, several names
| Name | Where it is used | Reference conditions (examples) |
|---|---|---|
| Aerobic plate count (APC) | US food testing, FDA BAM Chapter 3 | Plate count agar, 35 °C for 48 ± 2 h (milk at 32 °C) |
| Colony count at 30 °C | Food and feed, ISO 4833-1 (pour plate) and ISO 4833-2 (surface plate) | Plate count agar, 30 °C for 72 h |
| Heterotrophic plate count (HPC) | Drinking and process water, Standard Methods 9215 | Medium and temperature depend on the method chosen; formerly called the standard plate count |
| Total aerobic microbial count (TAMC) | Non-sterile pharmaceuticals, USP <61> and Ph. Eur. 2.6.12 | Soybean–casein digest agar, 30–35 °C for 3–5 days |
| Total combined yeasts and moulds count (TYMC) | Non-sterile pharmaceuticals, USP <61> and Ph. Eur. 2.6.12 | Sabouraud dextrose agar, 20–25 °C for 5–7 days |
In the pharmacopoeial test, fungal colonies that grow on soybean–casein digest agar are counted as part of the TAMC, and bacterial colonies on Sabouraud dextrose agar are counted as part of the TYMC. Details of the pharmaceutical test, including method suitability and acceptance criteria, are in the microbial limit test (USP <61> and <62>) guide.
Viable count vs total count
A total count (direct count) includes every cell that can be seen or detected, living or dead. A viable count includes only cells that multiply under the test conditions. For the same sample, the viable count is normally lower.
| Viable count | Total (direct) count | |
|---|---|---|
| What is counted | Colony-forming units that grow on the medium | All cells, living and dead |
| Typical methods | Pour plate, spread plate, membrane filtration, most probable number (MPN) | Counting chamber under the microscope (e.g. Petroff–Hausser), direct smear counts, instrument-based cell counting |
| Time to result | 1–7 days, depending on the method | Minutes to hours |
| Main limitations | Misses non-culturable cells; clumps count as one colony | Cannot separate living from dead cells without additional staining; poor at low concentrations |
Two other terms are easily confused with this one. In cell culture, “viable cell count” usually means a dye-exclusion count of mammalian cells in a counting chamber, a different measurement altogether. In cleanrooms, “viable” and “non-viable” monitoring refer to airborne microorganisms and airborne particles; see non-viable particle count in pharmaceutical cleanrooms and environmental monitoring methods and limits.
How the viable plate count method works
1. Initial suspension and serial dilution
Solid samples are homogenised in diluent, usually 10 g in 90 mL, which gives a 1:10 (10⁻¹) initial suspension. Tenfold dilutions are then made by transferring 1 mL into 9 mL, or 10 mL into 90 mL, of sterile diluent. FDA BAM uses 90 mL blanks of Butterfield’s phosphate-buffered dilution water and shakes each dilution 25 times in a 30 cm arc within 7 seconds; a bottle left standing for more than 3 minutes is shaken again before plating.
Two details matter more than they appear to. Adding 10 g to 90 mL is a 1:10 dilution, not 1:9, because the final volume is about 100 mL. And each transfer needs a fresh pipette tip; carry-over from a concentrated tube inflates the count at higher dilutions. The dilution calculator helps when preparing non-standard dilution volumes.
2. Pour plate or spread plate
| Pour plate | Spread (surface) plate | |
|---|---|---|
| Volume plated | 1 mL into an empty dish, then molten agar | 0.1 mL spread on a pre-poured, dried plate |
| Agar temperature | Not more than 45 °C (USP <61>); 45 ± 1 °C in FDA BAM | Not applicable |
| Colonies | Embedded and on the surface; smaller, harder to tell apart | All on the surface; easier to see and pick |
| Lowest count reportable from a 10⁻¹ suspension | 10 CFU/g (1 colony in 1 mL) | 100 CFU/g (1 colony in 0.1 mL) |
| Main drawback | Brief heat exposure can stress sensitive organisms | Ten times less sample per plate; spreading colonies |
FDA BAM requires the agar to be added within 15 minutes of preparing the original dilution. Plates are poured or spread in duplicate at each dilution, so that the result is an average rather than a single plate.
3. Incubation
Plates are incubated inverted under the conditions of the reference method: for example 35 °C for 48 ± 2 h for an FDA BAM aerobic plate count, 30 °C for 72 h under ISO 4833-1, or 30–35 °C for 3–5 days for a USP <61> TAMC. Counts obtained under different conditions are not directly comparable, even on the same sample.
4. Counting colonies on an agar plate
Count under even lighting with a colony counter or magnifier, marking each colony on the base of the dish as it is counted. Include pinpoint colonies. A spreading colony is counted as one colony per distinct spreader source. FDA BAM treats a plate as a spreader plate, rather than a countable one, when spreading growth (including the area of repressed growth) covers more than half of the plate, or the repressed area alone exceeds a quarter of it.
Which plates to count: 30–300, 25–250 or 15–300?
Every method sets a countable range. Below it, a few colonies multiplied by a large dilution factor give an imprecise estimate. Above it, colonies merge, compete for nutrients and inhibit each other, so the count reads low and becomes hard to count accurately.
| Reference | Application | Countable range per plate |
|---|---|---|
| FDA BAM Chapter 3 (current edition January 2026) | Aerobic plate count, foods | 15–300 (changed from 25–250 in the March 2025 revision) |
| USP <61> / Ph. Eur. 2.6.12 | TAMC and TYMC, non-sterile products | Dilution with the highest count below 250 (TAMC) or below 50 (TYMC) |
| ISO 4833-1 | Colony count at 30 °C, food and feed | Plates with fewer than 300 colonies |
| Standard Methods 9215B | Heterotrophic plate count, water (pour plate) | 30–300 |
The familiar 30–300 rule has a long history. Breed and Dotterrer examined it in 1916 for milk counts and found plates with roughly 40–200 colonies gave the most reproducible results. Tomasiewicz and colleagues reviewed how 30–300 became the accepted range and, in 1980, found that 25–250 minimised error for tenfold dilution series. Many textbooks and SOPs still quote 25–250 from the older FDA BAM edition, so it is worth checking which edition a laboratory procedure cites.
The pharmacopoeial range is narrower for moulds because their colonies spread and overlap; 50 colonies of a filamentous fungus can already crowd a 9 cm plate.
Environmental monitoring plates in cleanrooms (settle plates, contact plates and active air samples) are handled differently. There is no dilution series and no countable range; every colony on the plate is counted and reported per plate, per exposure time or per cubic metre of air, against the limits for the cleanroom grade. These are covered in the environmental monitoring guide.
Total viable count formula
N = C × F ÷ V
- N: count in CFU/mL or CFU/g of the original sample
- C: mean number of colonies on the replicate plates of one dilution
- F: dilution factor of the plated suspension (1,000 for a 10⁻³ dilution)
- V: volume plated, in mL (usually 1 mL for pour plates, 0.1 mL for spread plates)
The same formula is often written N = C ÷ (V × d), where d is the dilution itself (10⁻³ rather than 1,000). Both give the same answer.
Example 1: pour plate, one countable dilution
A liquid sample is diluted to 10⁻³ and 1 mL is pour-plated in duplicate. The plates show 131 and 147 colonies; the 10⁻² plates are too crowded to count and the 10⁻⁴ plates have fewer than 15.
- Mean count: (131 + 147) ÷ 2 = 139
- N = 139 × 1,000 ÷ 1 = 139,000 CFU/mL
- Reported to two significant figures: 140,000 CFU/mL (1.4 × 10⁵ CFU/mL)
Example 2: spread plate
A broth culture is diluted to 10⁻⁴ and 0.1 mL is spread on each of two plates, giving 82 and 90 colonies.
- Mean count: (82 + 90) ÷ 2 = 86
- N = 86 × 10,000 ÷ 0.1 = 8,600,000 CFU/mL
- Reported: 8.6 × 10⁶ CFU/mL
Leaving out the 0.1 mL volume gives 8.6 × 10⁵ CFU/mL, ten times too low. This is one of the most common calculation errors with spread plates.
Example 3: two dilutions in the countable range
When two consecutive dilutions both fall in the countable range, the colonies are pooled rather than the two results being averaged. FDA BAM calculates the count as a weighted mean, which works out as the total number of colonies divided by the total volume of original sample that went onto the plates.
Duplicate 1 mL pour plates give 212 and 236 colonies at 10⁻², and 26 and 19 colonies at 10⁻³.
- Total colonies: 212 + 236 + 26 + 19 = 493
- Original sample on the plates: (2 × 1 mL × 0.01) + (2 × 1 mL × 0.001) = 0.022 mL
- N = 493 ÷ 0.022 = 22,409 CFU/mL
- Reported: 22,000 CFU/mL (2.2 × 10⁴ CFU/mL)
Pooling gives more weight to the plates with more colonies, which carry less counting error. Under the current FDA BAM range of 15–300 all four plates qualify; under the older 25–250 range the plate with 19 colonies would have been outside it.
Example 4: TAMC of a non-sterile product
10 g of a tablet product is dispersed in 90 mL of buffered diluent (1:10). Duplicate 1 mL pour plates on soybean–casein digest agar, incubated at 30–35 °C for 3–5 days, show 48 and 56 colonies.
- Mean count: (48 + 56) ÷ 2 = 52
- N = 52 × 10 ÷ 1 = 520 CFU/g
Before any pharmacopoeial count is accepted, the method must be shown to recover microorganisms in the presence of the product (method suitability), and any antimicrobial activity must be neutralised. Media used for the count also need a passed growth promotion test.
Rounding and reporting
- Two significant figures. FDA BAM reports only the first two significant digits and rounds at the final step: 139,000 becomes 140,000; 22,409 becomes 22,000. When the third digit is exactly 5, BAM rounds up if the second digit is odd and down if it is even.
- Counts outside the range are reported as estimated counts and marked as such.
- No colonies on any plate are reported as less than 1 × the lowest dilution factor plated. With 1 mL of a 10⁻¹ suspension, that is <10 CFU/g.
- Too many to count (TNTC) plates are not used for the calculation unless no plate is in range; the method then gives rules for estimating from a representative area of the plate.
Common errors in viable plate counting
- Wrong dilution factor, most often treating 10 g in 90 mL as 1:9 or forgetting the initial suspension altogether.
- Ignoring the plated volume on spread plates (Example 2).
- Poor mixing between steps. Cells and particles settle; a dilution left standing needs re-mixing before the next transfer or before plating.
- Agar poured too hot, above 45 °C, which kills or injures part of the population.
- Averaging results instead of pooling colonies when two dilutions are in range (Example 3).
- Using plates outside the countable range as if they were exact, or reporting five or six significant figures from a plate count.
- Uncontrolled antimicrobial activity in the sample, such as preservatives or disinfectant residues, which suppresses growth on the plate and gives a falsely low count.
A dilution series also serves as its own check. The counts at successive tenfold dilutions should fall by roughly ten times. When they do not, for example 180 colonies at 10⁻² and 90 at 10⁻³, the cause is usually a pipetting error, carry-over, poor mixing or inhibition at the lower dilution, and the result needs investigating rather than averaging.
Limitations of the viable count
The plate count has stayed in use for over a century because it is cheap, robust and easy to standardise, but its limits should be stated alongside any result:
- It counts colonies, not cells, so chains and clumps lower the result.
- It counts only what grows on that medium under those conditions; no single agar recovers every organism.
- Results take one to seven days, which limits its use for real-time process control.
- Precision is limited by counting statistics, especially near the lower end of the range.
Rapid alternatives, such as ATP bioluminescence or growth-based automated systems, are used for faster results. In food microbiology these are typically validated against the reference plate count method under ISO 16140-2; in pharmaceutical testing, alternative methods need validation to show they are at least equivalent to the compendial method.
Frequently asked questions
Is total viable count the same as total plate count?
In practice, yes. Both describe colonies counted on a non-selective medium, and the two names are used interchangeably in food and water testing. Neither is truly “total”: the result always depends on the medium, temperature and incubation time.
Why are plates with 30–300 colonies counted?
Below the range, the estimate is imprecise because a few colonies are multiplied by a large dilution factor. Above it, crowded colonies merge and inhibit each other, so the count reads low. The exact limits vary by method: 15–300 in the current FDA BAM, below 250 for a USP <61> TAMC, and 30–300 for water HPC under Standard Methods.
What does TNTC mean?
Too numerous to count. It is recorded for plates above the upper limit of the countable range. The result is then taken from a higher dilution that falls within the range, or estimated from part of the plate if no dilution does.
How is a viable count reported when no colonies grow?
As less than the detection limit, not as zero. For 1 mL of a 1:10 suspension the result is <10 CFU/g; for 0.1 mL spread from the same suspension it is <100 CFU/g.
Does a TVC include yeasts and moulds?
Some yeasts and moulds grow on general-purpose media and are counted with the bacteria. In pharmaceutical testing they are counted separately as the TYMC on Sabouraud dextrose agar, while any fungal colonies that appear on the TAMC plates are included in the TAMC.
Related guides and tools
- Aerobic plate count in food: from colonies to a useful result
- Microbial limit test (USP <61> and <62>)
- Dilution calculator (C1V1 = C2V2)
References
- US Food and Drug Administration. Bacteriological Analytical Manual, Chapter 3: Aerobic Plate Count. January 2026 edition. fda.gov
- United States Pharmacopeia. <61> Microbiological Examination of Nonsterile Products: Microbial Enumeration Tests. Harmonized text, official 1 May 2025. usp.org (PDF)
- ISO 4833-1:2013/Amd 1:2022. Microbiology of the food chain — Horizontal method for the enumeration of microorganisms — Part 1: Colony count at 30 °C by the pour plate technique. iso.org
- APHA, AWWA, WEF. Standard Methods for the Examination of Water and Wastewater, Section 9215: Heterotrophic Plate Count.
- Breed RS, Dotterrer WD. The number of colonies allowable on satisfactory agar plates. Journal of Bacteriology. 1916;1:321–331. Discussed in O’Toole GA. Classic Spotlight: Plate counting you can count on. J Bacteriol. 2016;198(23):3127. PMC5105891
- Tomasiewicz DM, Hotchkiss DK, Reinbold GW, Read RB Jr, Hartman PA. The most suitable number of colonies on plates for counting. 1980. AGRIS record
Noman Iftikhar is a microbiologist with an MPhil in Microbiology and professional experience in pharmaceutical microbiology. His work includes sterility testing, bacterial endotoxin testing, microbial limit testing, environmental monitoring, and microbiological quality control. Through MicrobiologyPedia, he shares practical, evidence-based guidance to help microbiology students and laboratory professionals understand testing procedures, laboratory practices, and quality standards.


